FLSTFB Fat Boy Lo (2010)
Click Thumbnail to download (size 1600 x 1200 pixels)
Dressed in satin chrome and denim black, the Fat Boy Lo model features a reshaped seat and handlebar that places its rider "in" the motorcycle, with the lowest seat height of any Harley-Davidson model. The half-moon footboards, black wheels and leather tank panel help Fat Boy Lo rock to a singular, fat-custom beat.
The Fat Boy Lo is a Harley-Davidson Softail® model with a rear-suspension design that mimics the lines of a vintage hardtail frame, but offers the comfort of modern suspension that is hidden under the chassis. A horseshoe oil tank located below the seat, forward foot controls or foot boards, and the classic five-gallon Fat Bob® fuel tank are notable styling details of each Softail model.
A counter-balanced Twin Cam 96B™ V-Twin powertrain, rigid-mounted in the frame, powers the Fat Boy Lo model. The rigid powertrain allows tight packaging of the engine within the frame. Rated at 93.67 ft. lbs. of peak torque at 3000 rpm, the engine features Electronic Sequential Port Fuel Injection (ESPFI) and is finished in black powdercoat with bright machined highlights on the cylinder fins, and satin-chrome engine and primary drive covers. The 6-Speed Cruise Drive® transmission features a new helical-cut fifth gear for smooth operation.
Engine and Transmission
Engine: Air-cooled, Twin Cam 96BTM
Valves: Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder
Bore x Stroke: 3.75 in. x 4.38 in. (95.25 mm x 111.25 mm)
Displacement: 96 cu. in. (1584 cc)
Compression Ratio: 9.2:1
Fuel System: Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner: Paper, washable
Lubrication System: Pressurized, dry-sump
Primary Drive: Chain, 34/46 ratio
Final Drive: Belt, 32/66 ratio
Clutch: Multi-plate, wet
Transmission: 6-Speed Cruise Drive
Gear Ratios (overall): U.S.
• 1st 9.311
• 2nd 6.454
• 3rd 4.793
• 4th 3.882
• 5th 3.307
• 6th 2.790
Performance
Engine Torque (per SAE J1349):
• North America: 93.67 ft. lbs. @ 3000 rpm (127.0 Nm @ 3000 rpm)
Lean Angle (per SAE J1168):
• Right: 25.6°
• Left: 25.2°
Fuel Economy (EPA urban/highway test): 35/54 mpg (6.72/4.36 L/100 km)
Chassis and Dimensions
Frame: Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded
Swingarm: Mild steel, round tube sections, forged junctions; MIG welded
Front Forks: 41.30 mm telescopic, “beer can” covers
Rear Shocks: Hidden, horizontal-mounted, coil-over
Wheels: Black, Bullet Hole Disc Cast Aluminum
• Front: 17 in. x 3.50 in. (431.80 mm x 88.90 mm)
• Rear: 17 in. x 6 in. (431.80 mm x 152.40 mm
Brakes:
• Caliper Type: 4-piston front and 2-piston rear
• Rotor Type (diameter x width): Patented, uniform expansion rotors
• Front: 11.50 in. x .20 in. (292.10 mm x 5.08 mm)
• Rear: 11.50 in. x .23 in. (292.10 mm x 5.84 mm)
Suspension Travel:
• Front Wheel: 5.10 in. (129.54 mm)
• Rear Wheel: 3.60 in. (91.44 mm)
Length: 94.30 in. (2395.22 mm)
Overall Width: 39.20 in. (995.68 mm)
Overall Height: 44.30 in. (1125.22 mm)
Seat Height:
• Laden: 24.25 in. (615.95 mm)
• Unladen: 26.35 in. (669.29 mm)
Ground Clearance: 4.80 in. (121.92 mm
Rake (steering head): 31.6°
Fork Angle: 31.6°
Trail: 5.80 in. (147.32 mm)
Wheelbase: 64.50 in. (1638.30 mm)
Tires (Dunlop® Harley-Davidson Series, radial blackwall front and rear):
• Front – D408F: 140/75R17 67V
• Rear – D407: 200/55R17 78V
Fuel Capacity (warning light at approximately 1 gal.): 5 gal. (18.93 L)
Oil Capacity (w/filter): 3.50 qts. (3.31 L)
Transmission Capacity: 1 qts. (0.95 L)
Primary Chain Case Capacity: 1 qts. (0.95 L)
Weight:
• As Shipped: 700 lbs. (317.52 kg)
• In Running Order: 731.25 lbs. (331.70 kg)
• Gross Vehicle Weight Rating: 1160 lbs. (526.18 kg)
Weight Rating:
• Front: 430 lbs. (195.05 kg)
• Rear: 730 lbs. (331.13 kg)
Motorcycle Insurance Informations
|
